148
MAINTENANCE
Suspension Maintenance
Hi-Fax Wear
Check Hi-fax wear by
measuring thickness at
several points along the rail.
Replace Hi-fax when a
thickness of 5/16″ (.8 cm) is
reached (7/16″ on Xtra Lite
models). Take the m achine
to your dealer for Hi-fax
replacement.
NOTE: Hi-fax wear pat-
terns are somewhat different
on XTRA-12 suspensions.
The rear portion will wear
rapidly at first. After this
initial break-in period, the
rapid wear will cease.
If excessive Hi-fax wear
occurs due to poor snow
conditions, additional wheel
kits are available from your
dealer.
Measure Hi-fax thickness
5/16″ (.8 cm)
Minimum Thickness
all except Xtra Lite
7/16″ (1.1 cm)
Minimum Thickness
Xtra Lite
To Next Page
Loading...
Need help?
General
