54
THE PERFECT FIT
Rear Suspension Adjustments
Indy Select Front Track Shock
Some snowmobiles are equipped with the Indy Select front track
shock, which allows the driver to make adjustments to the compression
valving by turning the screw located near the base of the shock.
Adjustment
Locate the adjustment screw (A) near the base of the shock. In
half-turn increments, turn the screw clockwise to increase compression
valving and stiffen the ride, or counterclockwise to reduce compression
and soften the ride. There are approximately three full turns of
adjustment available.
A
To Next Page
Loading...
