124
MAINTENANCE
General Maintenance
Hydraulic Brake Insp ectio n
Frequently inspect
the brake lever
reserve. Firmly
depress the brake
lever and measure
the clearance
between the lever
and handlebar grip.
This distance,
called brake lever
reserve (A), should be no less than 1/2″ (1.3 cm).
Brake pads must be replaced when the brake pad material becomes
thinner than the backing plate (approximately 1/16″). A kit is available
for replacing brake pads. See your dealer.
A
Properly functioning brakes are vital to your safety. Be sure the
brake pads do not drag on disc and that brake lever travel is not
excessive.
Brake pads must be replaced when the brake pad material
becomes thinner than the backing plate (approximately 1/16″).
WARNING
To Next Page
Loading...
Need help?
General
