71
GETTING READY TO RIDE
Start The Engine And Check
n Transmission: Make sure the reverse is not engaged before
starting your machine.
n Engine Stop Switch : Check the auxiliary shut-off switch for
proper operation. Push down to stop the engine. Pull up to release
and start the engine.
n Tether Switch: If equipped, check the tether switch for proper
operation.
n Lighting Check: Check the headlight (high and low beam),
taillight, and brake light for normal operation.
n Mirror Adjustment: Adjust your mirrors so they can be used to
their full advantage.
n Check Surroundings to Verify Clear Operating Area
Make sure you have a clear area all around your snowmobile, including
an area clear of bystanders. There’s always the possibility of some
sideways vehicle movement, of applying a little more throttle than
intended, or of debris being thrown by the track. If t he surrounding
area is clear you before you start, you can devote your full attention to
operating the snowmobile.
To Next Page
Loading...
Need help?
General
