3.9
ENGINE
3
Engine Fastener Torque Patterns
22 2 ft. lbs. (30 3 Nm)
Crankcase Bolt Tighten Sequence
Lubricate threads and between washer and underside of bolt with engine oil.
Torque in sequence to spec provided, allow the gasket to set for 1 minute, then
tighten in sequence 90
(1/4 turn).
35 4 ft. lbs.
(47.5 5.5 Nm)
+ 90
(1/4 turn)
Cylinder Head Bolt Tighten Sequence
To Next Page
Loading...
