Place an Intercom Call
You can place an intercom call from Poly Trio to quickly relay a message to a contact.
Tip: Your system administrator can set up your phone to automatically call a specific contact when you
select Intercom. If your phone is set up this way, select Intercom and wait for your contact to
answer before speaking your message.
Procedure
1. Select Intercom.
2. Enter a number or select a contact.
3. Select Dial .
The phone plays a tone and the call is answered automatically on the contact's phone.
4. After the call is answered, speak your message then select Hang Up .
Place an Intercom Call During a Call
You can place an intercom call to another contact during an active call.
Procedure
1. Select Hold > Intercom.
The active call is placed on hold and the dialpad is displayed.
2. Enter a number or select a contact.
3. Select Dial .
The phone plays a tone and the call is answered automatically on the contact's phone.
4. After the call is answered, speak your message and select Hang Up .
5. Select Resume .
Redial a Number
automatically keep a record of all calls placed. You can recall the last contact you called using Redial, if
enabled by your system administrator.
Procedure
» Do one of the following:
• Select Redial.
• Select Place a Call > Recent Calls , and select the first number in the list.
Audio Calls
27
To Next Page
Loading...
Need help?
General
