Connecting Bluetooth and USB Devices
Topics:
• Connecting Devices using Bluetooth
• Connecting a Device using a USB Cable
You can connect a USB or Bluetooth-enabled laptop or mobile device to a Poly Trio system. You can also
connect Bluetooth-enabled devices to Poly Trio 8800 systems using Near Field Communication (NFC) .
When you connect a device to the phone, you can use it as your microphone for audio and video calls
and as a speaker for calls, music players, and videos.
Connecting Devices using Bluetooth
The Bluetooth feature on Poly Trio systems enables you to place calls on your mobile phone and use the
system as a speakerphone for the call. You can also use the system to play audio from media, such as
music or videos, from your mobile phone or tablet.
Note: The Poly Trio system does not automatically reconnect to previously paired Bluetooth devices
after the device is disconnected from the system or after a system reboot. You must manually
reconnect and pair the Bluetooth device with the Poly Trio system.
Related Links
Place a Call over Bluetooth on page 25
Make the System Visible to Nearby Bluetooth Devices
Before you connect a Bluetooth device to a Poly Trio system or NFC device to a Poly Trio 8800 system,
make sure the system is visible to nearby devices.
Procedure
1. On the Home screen, select Bluetooth.
2. Make sure the statement Visible to all nearby Bluetooth device is displayed below the system's
name, as shown next.
3. If the statement Only visible to paired devices is displayed, select the system's name.
The system is now visible to all nearby Bluetooth devices.
66
To Next Page
Loading...
