Polycom realpresence group series User Manual

Getting Started with Polycom RealPresence Group Series
Polycom, Inc. 4
System Health Check
After being powered on, the system automatically performs a system health check. This process is known
as a power on self test (POST).
The status of the POST sequence is shown using the LED indicator light on the front of the device, or in the
text field display on the front of the system. For more information about what the colors of the indicator lights
mean, contact your administrator.
All test results are logged in the system memory. When the test sequence completes with no severe errors,
the system starts normally.
Power Off a RealPresence Group System
If you need to change out certain connected peripherals, you might need to power off the RealPresence
Group system.
TASK
1 Touch the power sensor on the front of the system.
The indicator light changes color and blinks, which means that the system is shutting down.
2 Release the power sensor when the indicator light changes color.

Polycom realpresence group series Specifications

General

Video Standards	H.264, H.263, H.264 High Profile
Audio Standards	G.711, G.728
Content Sharing	People+Content
Network	H.323, SIP
Security	AES encryption
Video Input	HDMI
Video Output	HDMI
Audio Input	HDMI
Audio Output	HDMI
Audio Features	Noise Reduction, Automatic Gain Control
Connectivity	Ethernet
Ports	Ethernet, HDMI
Compatibility	Microsoft Lync / Skype for Business, BlueJeans, Zoom