Using a Polycom RealPresence Group Series Remote Control
Polycom, Inc. 9
1 With your remote control, press , then select .
2 To enter a name in the search field, do one of the following:
Enter the name using the onscreen keyboard.
Use the text-entry method commonly used with cell phones to select letters directly on your
remote control.
3 Select Search to search for an entry in the directory.
Calling
There are several ways to initiate calls on the system. You can place a call by entering your contact’s name
or number, by choosing a contact in the directory, or by calling a speed dial or recent contact.
You can perform all of the functions that are available when making conventional calls, plus you can make
multipoint conference calls.
Call by Entering a Name or Number
You can place a call several different ways.
One easy way to place a call is to enter a specific name or number using a touch device or the remote
control.
An alternate way of entering data is by attaching a standard English USB keyboard to one of the system's
USB ports. When a USB keyboard is connected to a RealPresence Group system, you can enter only
numbers with the remote control on the local interface Keypad or Contacts screens.
To enter letters, unplug the keyboard from the USB port, then select the Keyboard button now displayed
on your system screen.
Note: The Keyboard button does not display on your system screen if a USB keyboard is plugged into the
system USB port. After you unplug the USB keyboard from the system's port, the Keyboard button displays.
Keep in mind that, depending on the capabilities of your system and the system you are calling, the dialing
information could look like one of these examples:
● 10.11.12.13 (IPv4 address—include the dots)
● 2555 (E.164 extension for H.323 or SIP)
● stereo.polycom.com (host name)
● (SIP)
1 Press on the remote control.
To Next Page
Loading...
Need help?
General
