Using the SoundPoint IP Color Expansion Module
5 - 7
For example, in the figure below, press the fourth Line Key to dial home.
To assign a new speed dial key:
1. Press and hold an unassigned .
A new empty entry in the contact directory is automatically opened
allowing contact information to be added.
2. Press the More soft key.
3. Press the Add soft key.
4. (Optional.) Enter first and/or last name of the contact from the keypad.
Use the 1/A/a soft key to select between numeric and upper/lower case
alphanumeric modes.
Use the Encoding soft key to access special characters in other languages.
5. Enter a contact number.
The number must be unique (not already in the directory).
6. Change the Speed Dial Index field.
Valid speed dial index values are from 1 to 9999. If you enter a speed dial
index that already, “Speed dial index already exists” appears. If you enter
an invalid value, “Speed dial index invalid” appears.
Polycom recommends that you assign speed dial index values consecutively.
For example, if you assign the third Line Key to the speed dial index value “2”,
assign the fourth Line Key to the speed dial index value “3”.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
