Polycom SoundPoint IP 670 User Manual

Customizing Your Phone
2 - 9
4. Press the Select soft key.
Text that appears on the graphic display will change to the language of
your choice.
5. Press to return to the idle display.
Changing the Graphic Display Background
You can change the picture or design design that appears on the graphic
display. A default background displays when the phone starts up (shown
below). For more information on selections, contact your system
administrator.
To change the graphic display background:
1. Press .
2. Select Settings > Basic > Preferences > Backgrounds.
Note
Under certain circumstances, you may need make an additional menu selection,
Select Background, to actually select the background.
If your system administrator has configured the phone’s idle browser and you want
to view the background and not the idle browser, you can turn off the idle browser
by doing the following:
• Select Background > Prioritize Background.
• Select Enable and press the Select soft key.

Polycom SoundPoint IP 670 Specifications

General

Voice codecs	G.711, G.722, G.729
Noise reduction	Yes
Microphone frequency	150 - 7000 Hz
Caller ID	-
Phonebook capacity	- entries
Security algorithms	HTTPS
Supported network protocols	SNTP/FTP/TFTP/HTTP
Display resolution	320 x 160 pixels
Ethernet LAN (RJ-45) ports	2
Product type	IP Phone
Product color	Gray
Dimensions (WxDxH)	265 x 190 x 150 mm
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	20 - 85 %
Certification	FCC, RoHS, CE
Harmonized System (HS) code	85171800

Weight and Dimensions

Weight	1260 g