Polycom SoundPoint IP 670 User Manual

Using the Advanced Features of Your Phone
4 - 17
When the call ends, the idle display appears.
If you decide to reject the incoming call, press the Resume soft key, and
playback will resume. For more information, refer to Playing Back Recorded
Calls on page 4-14.
Restarting Your Phone
Periodically, you may need to restart your phone so your phone can accept a
new configuration.
To restart the phone:
1. Press .
2. Select Settings > Basic > Restart Phone.
“Are you sure?” appears on the graphic display.
3. If you still want to restart your phone, press the Yes soft key.
The restart process begins. The process ends when the idle display
appears.
Note
If you are using a digital headset with an answer button or an analog headset with a
electronic switch, use those to answer the incoming call.
Note
If your phone malfunctions, you may be able to restore normal operation without
restarting it. Before you restart your phone, contact your system administrator.
Note
Call lists are automatically cleared when you restart the phone.

Polycom SoundPoint IP 670 Specifications

General

Voice codecs	G.711, G.722, G.729
Noise reduction	Yes
Microphone frequency	150 - 7000 Hz
Caller ID	-
Phonebook capacity	- entries
Security algorithms	HTTPS
Supported network protocols	SNTP/FTP/TFTP/HTTP
Display resolution	320 x 160 pixels
Ethernet LAN (RJ-45) ports	2
Product type	IP Phone
Product color	Gray
Dimensions (WxDxH)	265 x 190 x 150 mm
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	20 - 85 %
Certification	FCC, RoHS, CE
Harmonized System (HS) code	85171800

Weight and Dimensions

Weight	1260 g