Polycom SoundPoint IP 670 User Manual

Customizing Your Phone
2 - 11
2. Select Settings > Basic > Preferences > Label Color.
Using the dial pad keys 1, 4, 7, and * change the red hues. Using the dial
pad keys 2, 5, 8, and 0 change the green hues. Using the dail pad keys 3, 6,
9, and # change the blue hues. The Label soft key on the right reflects your
changes.
3. Press the Save soft key.
Press the Reset soft key to reset the color to the default color.
Press the Undo soft key to undo your last change.
4. Press to return to the idle display.
Muting the Microphone
During a call, press . The Message Waiting Indicator turns red and a
microphone on the screen indicates that the other party (or parties) cannot
hear you.
Microphone Mute applies to all modes: Handset, Headset, and Hands-free
Speakerphone. You can still hear all other parties while mute is enabled.
To turn off Microphone Mute, press again.
Note
When the color of the label reaches a certain level of whiteness, “Cannot save this
color. Text might be inreadable.” appears. This popup appears only the first time the
color reaches that level.

Polycom SoundPoint IP 670 Specifications

General

Voice codecs	G.711, G.722, G.729
Noise reduction	Yes
Microphone frequency	150 - 7000 Hz
Caller ID	-
Phonebook capacity	- entries
Security algorithms	HTTPS
Supported network protocols	SNTP/FTP/TFTP/HTTP
Display resolution	320 x 160 pixels
Ethernet LAN (RJ-45) ports	2
Product type	IP Phone
Product color	Gray
Dimensions (WxDxH)	265 x 190 x 150 mm
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	20 - 85 %
Certification	FCC, RoHS, CE
Harmonized System (HS) code	85171800

Weight and Dimensions

Weight	1260 g