EasyManuals Logo

Polycom SoundPoint IP 670 User Manual

Polycom SoundPoint IP 670
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #84 background imageLoading...
Page #84 background image
User Guide for the SoundPoint IP 670 Desktop Phone
4 - 8
6. Use and to enable or disable the Access field.
When Access is enabled, you allow the contact to see your presence. When
Access is disabled, you prevent the contact from seeing your presence.
The default for Access is Disabled.
7. Press to return to the idle display.
For more information on contacting buddies, refer to Placing Calls on page 3-2
or the Microsoft Office Communicator and Windows Messenger
documentation.
Recording a Call
If the Call Recording and Playback feature is available and you plug a
removable USB flash drive into the USB port on your SoundPoint IP 670, you
can record active calls on your phone. Recordings are stored as .wav files on
the USB flash drive. You can record up to 4 hours in one file. The approximate
time remaining for recording (the free space on the USB flash drive) is shown
on the graphic display.
The Record soft key controls recording and is available:
When there are one or more calls connected to your phone (you may need
to press the More soft key to see it)
During an active call
When calls are on hold
During a consultative transfer or conference call
The Record soft key is not available:
Note
Call Recording is an optional feature and may not be supported on your particular
system. For more information, contact your system administrator.

Table of Contents

Other manuals for Polycom SoundPoint IP 670

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polycom SoundPoint IP 670 and is the answer not in the manual?

Polycom SoundPoint IP 670 Specifications

General IconGeneral
Voice codecsG.711, G.722, G.729
Noise reductionYes
Microphone frequency150 - 7000 Hz
Caller ID-
Phonebook capacity- entries
Security algorithmsHTTPS
Supported network protocolsSNTP/FTP/TFTP/HTTP
Display resolution320 x 160 pixels
Ethernet LAN (RJ-45) ports2
Product typeIP Phone
Product colorGray
Dimensions (WxDxH)265 x 190 x 150 mm
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)10 - 40 °C
Operating relative humidity (H-H)20 - 85 %
CertificationFCC, RoHS, CE
Harmonized System (HS) code85171800
Weight and Dimensions IconWeight and Dimensions
Weight1260 g

Related product manuals