Polycom SoundPoint IP 670 User Manual

User Guide for the SoundPoint IP 670 Desktop Phone
5 - 8
7. Press the Save or Cancel soft keys to accept or cancel changes.
8. Press to return to the idle display.
For more information on assigning speed dial keys, refer to Assigning Speed
Dial Keys on page 3-23.
Using the Busy Lamp Field
The busy lamp field (BLF) feature allows you to monitor the hook status and
presence information of other users. You monitor status information through
the BLF LED indicators and display on the phone with the attached
SoundPoint IP Color Expansion Module. For more information, contact your
system administrator.
The following figure shows the busy status of other users (for example, Louis,
Jack, Don, William, Milton, and Z are busy on the phone):
For more information, refer to “Quick Tip 37381: Enhanced BLF“ at
http://www.polycom.com/usa/en/support/voice/soundpoint_ip/VoIP_T
echnical_Bulletins_pub.html .

Polycom SoundPoint IP 670 Specifications

General

Voice codecs	G.711, G.722, G.729
Noise reduction	Yes
Microphone frequency	150 - 7000 Hz
Caller ID	-
Phonebook capacity	- entries
Security algorithms	HTTPS
Supported network protocols	SNTP/FTP/TFTP/HTTP
Display resolution	320 x 160 pixels
Ethernet LAN (RJ-45) ports	2
Product type	IP Phone
Product color	Gray
Dimensions (WxDxH)	265 x 190 x 150 mm
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	10 - 40 °C
Operating relative humidity (H-H)	20 - 85 %
Certification	FCC, RoHS, CE
Harmonized System (HS) code	85171800

Weight and Dimensions

Weight	1260 g