1-3
1 Safety Information
1.3.3 User Qualification
1.3.4 Ambient Conditions
ATTENTION!
Damage to the sensor head caused by impurities!
If dust and other dirt particles from the operating environment penetrate the
instrument, this can cause lasting damage to the instrument.
» Always protect the objective ports on the sensor head with the respective
covers if no objective is mounted.
Operation and
storage
Operate and store the instrument in the ambient conditions as specified in the
technical specifications.
1.3.5 Personal Protective Equipment (PPE)
Task Qualification
Assembly, cabling, adjustment,
operation
The instrument may only be used by qualified personnel
who are familiar with electrical measuring instruments,
have been trained to use the instrument, and have been
instructed on how to work with lasers.
Repair and maintenance The instrument may only be serviced or repaired by the
manufacturer or by qualified personnel authorized by the
manufacturer.
Exchange/installation of
subassemblies
Subassemblies may only be exchanged or installed by
authorized service personnel from Polytec.
PPE For the following work processes Source of danger
Safety shoes - Transport
- Assembly
- Disassembly
Heavy parts
To Next Page
Loading...
Need help?
General
