POLYtij S1i - Edit Options

27
5.4.2 Edit Options
Click on system management interface to enter edit options setting interface.
A. Click to enter production date
Date format
and expiry date format setting.
New format
Note: Seven common date formats default,
Forty-three more formats addable for
user. The seven default date formats
noteditable
Edit format
can not be deleted.
Delete format
Click I to modify date
format,
click
to delete the existing date format.
Note:
Year/Month/Hour/week have 2 hex
options: decimal/36 hex, before
operating first need to select hex and
then the date format.
Hex switch
1. Year, options are: ---4-Digit, ---Last 2 digit, ---Last 1 digit
2.
Month, options are: ---Full digit, ---Jan to Sep is1-9, Oct to Dec is O/N/D
---Abbreviations, ---Full English
3. Hour,optionsare: --24H system, ---12H system
B. Click to enter special time
Setting .
Date transition
time setting
see Appendix 1: Terms and
Definitions 4, 5.
Pre-zero in
date/time
Special time
setting
1) Date transition time setting: Off is system default, zero point is normal date transition, users can set
different time as date transition .
2) Pre-zero in date/time: four options: OFF, empty preposition, empty postposition, content centered
without blank. (e.g. 2012/05/09, 2012/_5/_2, 2012/5_/2_, 2012/5/2).
C. Click to enter counter
setting.
Capacity
counter
Counter
pre-zero
Counter alarm
Counter reset
Counter setting
1) Capacity counter: setting range: 0~99999999.
2) Pre-zero: Click the down button to switch the four options (e.g.
：
0001
、
1
、
1
、
1 ).
3) Counter alarm: ON or OFF option. When counter alarm is turned ON, the machine will stop printing
when print number reaches maximum value.
4) Counter reset: ON or OFF option. All counters will start from initial values if the counter reset isturned
ON. The printing value will continue from the last printing if the counter reset is turnedOFF.