What to do if my POLYtij S3i Printer does not print?
If your POLYtij Printer isn't printing, it might be due to a used up or damaged cartridge. The solution is to replace the cartridge with a new one, especially if the ink is depleted or the cartridge dealer code is incorrect.
How to fix the POLYtij S3i when the print has lines or missing print?
If your POLYtij Printer is producing prints with lines or missing sections, it could be due to a nozzle blockage or damage. Try wiping and cleaning the nozzle with a Non-woven cloth, referring to Section 6.2 Ink cartridge maintenance. Alternatively, use the cleaning purge function as described in Section 5.4.3. Another potential cause is poor cartridge connection; in this case, remove and re-insert the cartridge to ensure proper contact.
Why my POLYtij Printer is unable to identify the ink cartridge?
If your POLYtij Printer can't identify the ink cartridge, it might be due to connectivity issues related to a defect or damage. Ensure the smart chip is properly connected to the cartridge and correctly placed. Try removing and re-inserting the cartridge. Another reason could be a cartridge dealer code mistake. In such cases, replace the cartridge with a new one and re-insert it.
What to do if top half of print is complete and the bottom half of the print is incomplete on POLYtij S3i?
If the top half of your print from the POLYtij Printer is complete but the bottom half is incomplete, it could be because the ink is low or air bubbles are blocking the nozzles. First, check the status bar for a low ink alarm. If the problem persists, return to the distributor for testing.
How to fix POLYtij S3i Printer when it cannot be turned on?
If your POLYtij Printer cannot be turned on, the issue might be due to no power input. Ensure that the AC power input on the adapter is correct and that the DC output on the adapter is properly connected to the printer.
What to do if my POLYtij S3i Printer is unable to identify the ink cartridge?
If your POLYtij Printer fails to recognize the ink cartridge, first remove the cartridge and then re-insert it to ensure proper connectivity. If the issue persists, it might be due to a cartridge dealer code mistake, in which case you should replace the cartridge with a new one and re-insert it.
How to fix broken or white lines on POLYtij Printer prints?
If your POLYtij Printer is producing prints with broken or white lines, it could be due to a nozzle blockage or damage. You can try wiping and cleaning the nozzle with a non-woven cloth, or using the one-key cleaning function. Another potential cause is poor cartridge connection. Try removing and re-inserting the cartridge.
Why is my POLYtij S3i Printer printing blank pages?
If your POLYtij Printer is printing totally blank pages, check the ink status to see if the ink is used up or if the nozzle is totally blocked.
Key safety guidelines for operating the printer correctly and safely.
Instructions for equipment setup and ink cartridge installation.
Procedures for maintaining the printer and ink cartridges.
Common failures and their corresponding solutions.
Guidelines for safely installing the printer and its components.
Guidelines for safely operating the printer and avoiding damage.
Details on the printer's technical capabilities and specifications.
Initiating and halting the printing process, including print report display.
Adjusting the print alignment for two print heads.
Configuring print head mode, direction, and mirror settings.
Configuring nozzle selection for print heads to optimize ink usage.
Configuring special printing modes like continuous and reverse printing.
Managing user accounts and assigning operational rights.
Resetting specific printer modules or all settings to default.
Specifications for image files and updating printer software, language, and resources.
Backing up and restoring printer settings and data.
Checking the status of ink cartridges, including ink levels and warnings.
Displaying the printer's current operational status and system information.
Checking encoder connection status and performing tests.
Checking photocell connection status and performing tests.
Checking the status of USB devices, including volume and remaining space.
Solutions for common problems related to ink cartridges and print quality.
Solutions for common printer operational problems like power and printing errors.
General| Technology | Thermal Inkjet |
|---|---|
| Print Technology | Thermal Inkjet |
| Power Requirements | 100-240 V AC, 50/60 Hz |
| Connectivity | USB, Ethernet |
| Supported Media Types | Porous, non-porous |
| Media Width | Up to 12.7 mm |
| Operating Temperature | 5 to 40°C |
| Humidity | 10 to 90% RH |
To Next Page
