POLYtij S3i - 3.6.3 Backup and Recovery

Edition: A03 September 6, 2018
46
3.6.3 Backup and recovery
Backup
 Insert U disk, click【Tools】>【Backup】
 Click required backup option, multi-optional available (backup will be failure if
not select any options,)
 Backup name is available for 30 characters limit, English, numbers, symbols (
Except “\/:*?"<>|”) and Chinese. The backup name cannot be left empty.
 Click【Backup】 and backup will complete saving path under : Inkjet/Backup/
Recovery
 Save the backup file under the U disk path (Inkjet/backup/), insert a USB disk and click
【Tools】>【Backup】
 Select required recovery backup file from drop down list.
 Check recovery method, you can only choose one corresponding method, if you
don’t choose, it won’t recover corresponding type.
Clear
Replace
Addition
Message
It will delete all
original MSG’s,
and only keep
restored
messages
If restored MSG
contains the same file
name as the original
MSG, then restored
MSG replaces the
original message and
the file name will be
unchanged
If the restored MSG contains
the same file name as the
original MSG, it will only add
non-duplicate files. Messages
with the same file name will
be excluded
Image
Delete all
original images,
only keep
restored images
If the restored image
contains the same file
name as the original,
then the restored image
If restored image contains the
same file name as the original,
it will only add the non-
duplicate files. The images