POLYtij S3i - 3.5.4 System Reset

Edition: A03 September 6, 2018
42
Open the user management, select user info and click Delete to remove the user info.
Tip: You cannot delete the Administrator.
Close user management
Open user management to popup a page requiring you to input a password. Once the correct
administrator password has been entered and you select “yes”, the icon will turn grey and you can
close the user management.
3.5.4 System Reset
 Select the choices which need reset, can select multiple choices. (MSG, image, print
parameters, system parameters, language, font and keyboard)  Click All, all options are selected
automatically.
 Click None, all selected options are deleted.
 After selected, click【Reset】, it will jump out a page requiring inputting administrator
password. Then the printer will restart automatically.
Items can be reset:
Module
Items
Parameters
Message
Message list
Clear
Image
Image list
Clear
Printing parameters
Print setting
Single nozzle P1
Printing direction
R To L
Photocell setting
P1
Mirror
None
Nozzle switch
Left nozzle
DPI
300
Line speed
30
Production counter
0
Spit function
Closed
Counter reset
Closed
Pre-print
Closed
Spit function mode
Double nozzles
Object width
0
Printing buffer
20
Print record
10
Continuous printing
0
Repeat on
Off
Printing gap
0
Long-term PC
Off
Reverse print
0
Reverse interval
0
Refresh rate
0
Clean buff
none
Frequency
Off