Edition: A03 September 6, 2018
32
【Modify Shift Content】: Select the shift from the list on the left to then edit its content
on the right side, 【Add】will change to【Modify】,click【Modify】to save.
【Shift name】: Default is shift + number. User can input no more than 30 characters and can’t
input (" \ / : *? "< > |") or leave empty, otherwise it will not be allowed to save.
【Save shift】: Click button to save list and return to previous interface.
Edit: Selected the shift from the 【shift list】, click “edit” popup the editing interface, click
“save” to save the changes. The default shift cannot be edited.
Select All: All shifts in the lists are selected; Click the switch again to unselect all.
Delete: Select the shift you want to remove. The default shift cannot be deleted.
Closing Shift Management: Click on close to exit of management interface and save existing
shifts.
【Font】【Position】【Others】【Paragraph】【Name】settings are same as with a text
object.
5) Barcode object
【Message】>【New】>【New object】>【Barcode】
User can only input text and no source, other settings are the same as a barcode message.
6) Local image object
【Message】>【New】>【New object】>【Local Image】
Image Preview: Select the image from the list. It will display in preview box.
【Position】【Others】【Paragraph】【Name】settings are same as image object.
3.2.3.2 Object List
Same as standard mode.
User can’t add source’s within simple mode, so it will have no 【switch】function.
3.2.4 Edit Message
Same as standard mode.
3.2.5 Copy/Paste Message
Same as standard mode.
3.2.6 Delete Message
Same as standard mode.
To Next Page
Loading...
