Edition: A03 September 6, 2018
3
Introduction
Thank you for purchasing our POLYtij® S3i high resolution thermal inkjet printer. We hope to provide
helpful information with this machine, please read the manual carefully to learn more about the inkjet
printer and following the content below:
• Important precautions for use of the machine
• Introduction of printer: Parts and components of the machine
• Setup and Installation Instructions: Instructions for equipment setup and cartridge installation.
• How to use the printer and the check work before/after use of the printer: explanations of
general operation and start-up/shutdown.
• Operation instructions: explanations on how to new/edit data for printing, and how to adjust
printer settings.
• Care and Maintenance: Care and maintenance for printer and cartridges
Troubleshooting: Common failures and solutions
• Appendix 1 - Terms and Definitions: Definitions for terms used in this document.
Please read this user manual carefully before using the printer to grasp a full understanding of the
various capabilities and settings. This will also provide the user a quick reference to related sections
if encountering problems during operation.
Note 1: If the user cannot solve the problem encountered during operation, please contact your
distributor.
Note 2: The information contained herein is subject to change without notice. The user manual will be
updated and revised timely if necessary by publication of a new version.
Note 3: Any machine failure or damage caused by user’s negligence, will not be deemed under
warranty.
To Next Page
Loading...