Potensic ATOM 2 - Page 36

35
Calibration
Peorm compass calibration, gimbal calibration, gimbal ne-tuning, remote controller calibration and drone
re-pairing.
Control
Control Stick Settings: set the control stick mode (Mode 1/Mode 2/Custom), review the remote
controller instructions, congure the customizable buttons, and adjust the sensitivity of the control
sticks.
•Control Stick Mode: switch control stick modes, including Mode 1 (right hand throttle), Mode 2 (left hand
throttle) and Custom.
•Review the remote controller instructions, congure the customizable buttons.
•Stick Sensitivity: allow users to adjust the control stick sensitivity for dierent ight modes, enabling
separate adjustments for the control responsiveness during the drone’s ascent/descent, rotation, and
movement.
Gimbal Settings: set the gimbal maximum tilt control speed, swith the gimbal tilt angle (0°/-90°), adjust
the roll smoothness and set the gimbal mode (Stable/FPV Mode).
Camera Settings:
•Set WB, gridlines, color, segmental recording and coding format.
•Reset Camera Settings: tap to reset camera parameters to the default settings in Manual mode. Reset
unavailable in Auto mode.
•Enable/disable Global Parameter Application: after enabling, the general shooting parameters set in
manual camera mode will be applied across all shooting modes.
SD Card Settings: view SD card storage, format SD card and reset lename number.
Other Settings:
•Enable/disable Auto-Center Target: after enabling, the target will automatically be centered on the screen
when locked onto.
•Enable/disable Defog Mode, Video Subtitles and GNSS coordinates in photo's metadata.
Camera
Video Transmission
Enable/disable Ecient Video Transmission Format: after enabling, it can enhance the video transmission
quality, but some phone models may not suppo the display of video feed. If there is no video transmission
feed after enabling, please disable this option.
View the video transmission channel map to obsee the strength of environmental inteerence. The system
will automatically select the channel with the least inteerence, choosing the optimal channel for the current
conditions.
About
Displays information such as device model, rmware and App version.