41
Method 1: Tap on the left of App to exit RTH.
Method 2: Press once the return button on the remote controller to exit RTH.
One Button RTH: Press and hold the RTH button on the remote controller for 1s or tap in the App to
pop up the menu, then swipe right to sta the return.
Auto RTH: When either the drone batte level is low, the signal between the drone and the remote
controller is lost or the drone is experiencing other abnormalities, Auto RTH will be triggered.
8.8 Return to Home (RTH)
The regular return consists of three steps, as follows:
•If there are obstacles in the surrounding environment and it's not suitable to return, it is recommended
to keep the drone hovering or land the drone after losing signal in Settings to avoid colliding with the
obstacles during RTH.
1. Ascent: The drone ascends to the preset return altitude (this step is skipped if the drone's altitude is
already higher than the return altitude).
2. Level Flight: The drone maintains a straight ight at the preset altitude towards the HOME point.
3. Landing: Once it reaches the HOME point, the drone will automatically land and stop its motors.
How to Exit RTH
RTH Requirements
The drone must take o in GNSS mode and successfully record the HOME point.
If the drone takes o in OPTI mode and switches to GNSS mode mid-ight, it will not be able to return to the
takeo point.
Please pay attention to the location of the HOME point on the map and the prompts in Potensic Eve App.
How to Sta RTH
Return to Home (RTH) The drone must be in GNSS mode
＞20m
Return ascent
If Drone altitude ≥ return
altitude, sta from step 2
Return altitude = Your settings
Return ight
Landing
1
2
H
3
8.8.1 Regular Return
To Next Page
Loading...
