Potensic ATOM 2 - Connection; Flight Mode; Beginner Mode

•After exiting Beginner Mode, users can modify parameters such as RTH altitude, ight mode, ight
altitude, and ight distance.
•To ensure ight safety, Spo Mode is only available when the batte level is above 30%. If the
batte level drops below 30% during ight in Spo Mode, the drone will automatically exit Spo
Mode.
•Be vigilant and maintain adequate maneuvering space during ight, as the responsiveness of the
drone signicantly increases in Spo mode.
•The maximum speed and braking distance of the drone signicantly increase in Spo Mode. A
minimum braking distance of 30 m (100 ft) is required in windless conditions to ensure safety.
•When ying in Spo Mode or strong wind, the gimbal may shake, which is normal.
•The maximum speed may va within a range of ±1 m/s. Please refer to the actual experience.
8.6 Beginner Mode
When using the drone for the rst time, it will default to Beginner Mode. In Beginner Mode:
1. The ight distance and altitude are limited to 0 m ~ 30 m.
2. The ight mode is restricted to Video Mode.
3. It is recommended that beginners sta in Beginner Mode to learn and become familiar with the drone.
38
8.5 Flight Mode
ATOM 2 suppos the following ight modes, which can be switched via the Potensic Eve App.
Video Mode
Ascent speed: 2 m/s, descent speed: 2 m/s, ight speed: 6 m/s
The drone enters Beginner Mode by default when being used for the rst time. The ight speed will be
limited to the same as in Video Mode to allow you to familiarize yourself with the controls of the drone.
Normal Mode
Ascent speed: 4 m/s, descent speed: 3 m/s, ight speed: 10 m/s
You can exit Beginner Mode after you have mastered adequate ight skills, and the drone will switch to
Normal Mode by default.
Spo Mode
Ascent speed: 5 m/s, descent speed: 4 m/s, ight speed: 16 m/s
Video Mode is recommended for aerial photography. Spo Mode is recommended if you would like to get a
speedy ight experience.
Please y with caution in Spo Mode as the responsiveness of the drone signicantly increases, which means
a small control stick movement on the remote controller translates into the drone moving a large distance.
•It is recommended to tap on "Guide" during the rst use to view and follow the animated instructions.
8.4 Connection
Follow the steps below to connect the mobile device, remote controller and drone:
1. Follow the procedures in Chapter 4.2 and power on the remote controller.
2. Follow the procedures in Chapter 4.1 and power on the drone.
3. Launch Potensic Eve App and check the connection status. When the home screen displays ,
it indicates that the mobile device, remote controller and drone are successfully connected.
4. Tap to enter the ight inteace.