1 Before You Start Ether232Plus User Guide
4 Precidia Technologies Inc. 02-CML000057
N
OTE
: See Appendix B, Troubleshooting and Support, for descriptions of how indica-
tor lamps can be used for troubleshooting.
Back Panel
Back Panel of the Ether232Plus
Table 1.1: Front Panel Indicator Lamps
Indicator Lamp Description
ON Illuminates constantly when power is applied to the unit.
— ETHERNET —
LINK Illuminates constantly when the Ethernet port has a valid
connection to a 10BaseT Ethernet network.
COLLISION Illuminates under high traffic loading, when network conges-
tion results in collisions. Collisions are resolved by the Ether-
net protocol and do not necessarily indicate data loss. Lamp
flashes to indicate this activity.
TRANSMIT Illuminates when the unit has control of the line and is send-
ing data on the network. Lamp flashes to indicate this activity.
Does not illuminate when receiving data.
— COM —
TRANSMIT Illuminates when the unit is sending or receiving data out the
COM port. Lamp flashes to indicate this activity.
Illuminates constantly while in configuration mode.
STATUS Off: Unit incorrectly configured or the COM port is disabled.
Slow flash: Correctly configured, in idle mode.
Fast flash: Correctly configured, terminal has communicated.
On (solid): Correctly configured, connected.
To Next Page
Loading...