Precidia Ether232Plus - 6 System Settings

02-CML000057 Precidia Technologies Inc. 49
6
System Settings
The System Settings should only be configured by network administrators or
advanced users who need to upgrade the firmware or view log information.
To configure or change the System Settings, select
System Settings
from the Device
Settings
menu.
The System Settings sub-menu appears on the right side of the Configuration screen,
as shown below.
N
OTE
: Remember to save your changes by typing "*" to exit configuration!
,-----------------------------------------------------------------------------.
| Precidia Ether232Plus Configuration v4.04.00 |
|-----------------------------------------------------------------------------|
| Device Settings: | System Settings: |
| | |
| 1) Ethernet: 192.168.1.28 | A) Unit ID value: 00:01:1E:00:17:46 |
| | |
| 2) Serial Port: Transparent | B) Web Page Download: 59kB |
| | C) Firmware Download: 2004-03-05 |
| | |
| | D) Display System Status |
| | E) Dump System Log (long) |
| | F) Delete System Log |
| | |
| | G) Perform Self Test |
| *) Save Current Configuration | H) Reset Unit |
| -) Exit Configuration (no save) | |
| $) Security Settings | I) SNTP Settings |
| #) System Settings | |
| ?) Refresh this Screen | J) Disable TCP keep-alives: no |
`-----------------------------------------------------------------------------'
Change which option?
System Settings Sub-menu