02-CML000057 Precidia Technologies Inc. D-1
Appendix D: Connecting with
Telnet
Before you can access and reconfigure Precidia products remotely, you must
configure the following settings locally:
• the IP Address and Subnet Mask (or automatically with DHCP)
• the Gateway address if necessary (or automatically with DHCP)
• the Remote Password
Refer to the User Guide for more information on configuring these settings.
To connect to the Precidia unit remotely using Telnet:
1 From the
Start menu
, select
Run...
The Run window appears.
2 Type
telnet
in the Open field and click
OK
.
The Telnet application window appears.
To Next Page
Loading...