02-CML000057 Precidia Technologies Inc. 37
5
Configuring the Security
Settings
The Security Settings sub-menu allows you to activate SNMP (Simple Network
Management Protocol) and IPsec (Internet Protocol security), and restrict access to the
Ether232Plus by specifying passwords and user IDs.
To configure or change the Security Settings, choose
Security Settings
from the
bottom of the Device Settings menu.
The Security Settings sub-menu appears on the right side of the Configuration screen,
as shown below.
N
OTE
: Remember to save your changes by typing "*" to exit configuration!
,-----------------------------------------------------------------------------.
| Precidia Ether232Plus Configuration v4.04.00 |
|-----------------------------------------------------------------------------|
| Device Settings: | Security Settings: |
| | |
| 1) Ethernet: 192.168.2.56 | A) Console Password: (not set) |
| | B) Remote Password: (hidden) |
| 2) Serial Port: Transparent | |
| | C) Web Server: enabled |
| | D) Access Userid: (not set) |
| | E) Access Password: (not set) |
| | |
| *) Save Current Configuration | F) SNMP Server: enabled |
| -) Exit Configuration (no save) | G) SNMP Settings |
| $) Security Settings | |
| #) System Settings | H) IPsec Tunnel #1: disabled |
| ?) Refresh this Screen | I) IPsec Tunnel #2: disabled |
`-----------------------------------------------------------------------------'
Change which option?
Security Settings Sub-menu
To Next Page
Loading...