Precidia Ether232Plus - 3 Configuring the Ethernet Settings

02-CML000057 Precidia Technologies Inc. 15
3
Configuring the Ethernet
Settings
The Ethernet Settings sub-menu allows you to specify a unique IP address for your
Precidia unit to enable communication over an IP network and with the remote host(s).
To configure or change the Ethernet Settings, choose
Ethernet
from the Device
Settings
menu.
The Ethernet Settings sub-menu appears on the right side of the Configuration screen,
as shown below.
N
OTE
: Remember to save your changes by typing "*" to exit configuration!
,-----------------------------------------------------------------------------.
| Precidia Ether232Plus Configuration v4.04.00 |
|-----------------------------------------------------------------------------|
| Device Settings: | Ethernet Settings: |
| | |
| 1) Ethernet: 0.0.0.0 | A) IP Address: 0.0.0.0 |
| | B) Subnet Mask: 0.0.0.0 |
| 2) Serial Port: disabled | C) Gateway: 0.0.0.0 |
| | |
| *) Save Current Configuration | Additional Gateway: |
| -) Exit Configuration (no save) | D) Network Address: 0.0.0.0 |
| $) Security Settings | E) Network Mask: 0.0.0.0 |
| #) System Settings | F) Gateway: 0.0.0.0 |
| ?) Refresh this Screen | |
`-----------------------------------------------------------------------------'
Change which option?
Ethernet Settings Sub-menu