02-CML000057 Precidia Technologies Inc. 1
1
Before You Start
1.1 Preview
Each section in this Guide is a step in the process of installing and configuring your
Precidia unit:
1 Before You Start
Familiarize yourself with the features and installation requirements of the unit.
2 Setting up the Ether232Plus
Set up the hardware and configure the unit via terminal software.
3 Configuring the Ethernet Settings
Input the IP address, subnet mask, and gateway address for the unit.
4 Configuring the Serial Port Settings
Configure the protocol, speed, connection control, and port information.
5 Configuring the Security Settings
Configure the remote, console, and Web passwords, SNMP, and IPSec.
6 System Settings
If necessary, have your network administrator configure the advanced settings,
including downloads and system logging options.
7 Accessing System Information
Find out how to access the system information locally or remotely.
Appendices at the back of this guide also provide valuable reference information:
A Glossary of Terms and Acronyms
B Troubleshooting and Support
C Specifications and Warranty
D Connecting with Telnet
E Pinouts and Power Supply
To Next Page
Loading...