5 Configuring the Security Settings Ether232Plus User Guide
48 Precidia Technologies Inc. 02-CML000057
2 Type the first half of the authentication key (16 characters) in hexadecimal format
at the prompt, and press
Enter
.
3 Choose
Auth (Pt2)
from the Secure IP Association sub-menu.
You are prompted to enter bits 65–128 of the authentication key in hex.
4 Type the second half of the authentication key (16 characters) in hexadecimal
format at the prompt, and press
Enter
.
The keys are displayed in the Secure IP Association sub-menu.
I
MPORTANT
! The SPI, Encode Keys, and Authenticate Keys must be the same on
both ends of the IPsec tunnel (secure connection).
To Next Page
Loading...