Precidia Ether232Plus - Page 60

6 System Settings Ether232Plus User Guide
54 Precidia Technologies Inc. 02-CML000057
If you require a real-time clock and have access to an SNTP server, you may configure
the Primary Server and the Secondary Server as described below:
1 Choose
SNTP Settings
from the System Settings sub-menu.
The SNTP Settings sub-menu is displayed, as shown below:
6.9.1 Primary Server
1 Choose
SNTP Settings
from the System Settings sub-menu.
2 Choose
Primary Server
from the SNTP Settings sub-menu.
You are prompted to enter the IP address of the device.
3 Type the unique IP address at the prompt (in the format xxx.xxx.xxx.xxx) and press
Enter
.
6.9.2 Secondary Server
1 Choose
SNTP Settings
from the System Settings sub-menu.
2 Choose
Secondary Server
from the SNTP Settings sub-menu.
You are prompted to enter the IP address of the device.
3 Type the unique IP address at the prompt (in the format xxx.xxx.xxx.xxx) and press
Enter
.
,-----------------------------------------------------------------------------.
| Precidia Ether232Plus Configuration v4.04.00 |
|-----------------------------------------------------------------------------|
| Device Settings: | SNTP Settings: |
| | |
| 1) Ethernet: 192.168.1.30 | A) Primary Server: 192.168.1.1 |
| | B) Secondary Server: 192.168.1.2 |
| 2) Serial Port: Transparent | |
| | |
| *) Save Current Configuration | |
| -) Exit Configuration (no save) | |
| $) Security Settings | |
| #) System Settings | |
| ?) Refresh this Screen | |
`-----------------------------------------------------------------------------'
Change which option?
SNTP Settings Sub-menu