iPocket232 User Guide 2 Setting Up the iPocket232
23-CML000293 iPocket232 Inc. 14
2.6 Resetting to Factory (Default) Configuration
You may need to reset to “factory” settings if you have configured and subsequently
lost a Console Password, or if you wish to completely reconfigure the unit. The
procedure below will delete your previous configuration and revert all settings to
factory default.
1 Unplug the power cord from the back of the unit.
2 Press and hold the recessed CONFIGURE button and plug the power cord back in to
the POWER port.
3 Continue to press and hold the recessed
CONFIGURE
button for 15 seconds. The
Configuration screen appears, reset to the factory settings.
4 Reconfigure the unit.
5 Type “*” to save the new configuration.
N
OTE
: If you do not save the new settings, the unit will restart with the previously
saved settings.
To Next Page
Loading...