15 iPocket232 Technologies Inc. 23-CML000293
3 Configuring the Ethernet
Settings
The Ethernet Settings sub-menu allows you to specify a unique IP address for your
iPocket232 to enable communication over an IP network and with the remote host(s). If
you are using a DHCP server, leave all Ethernet Settings at zero (0.0.0.0). The settings
will always appear as zeros in the menu regardless of the values assigned by the DHCP
server.
To configure or change the Ethernet Settings, choose Ethernet from the Device
Settings menu.
The Ethernet Settings sub-menu appears on the right side of the Configuration screen, as
shown below.
,-----------------------------------------------------------------------------.
| iPocket232 iPocket232 Configuration v4.03.00 |
|-----------------------------------------------------------------------------|
| Device Settings: | |
| | |
| 1) Ethernet: 0.0.0.0 | |
| | |
| 2) Serial Port: disabled | |
| | |
| *) Save Current Configuration | |
| -) Exit Configuration (no save) | |
| $) Security Settings | |
| #) System Settings | |
| ?) Refresh this Screen | | `-----------
------------------------------------------------------------------'
Change which option?
Ethernet Settings Sub-menu
N
OTE
: Remember to save your changes by typing "*" to exit configuration!
To Next Page
Loading...