5 Configuring the Security Settings iPocket232 User Guide
23-CML000293 iPocket232 Inc. 42
The current password is displayed in brackets: [was: password].
3 Do not type any characters. Press ESC to keep the same password and return to the
menu.
Clearing the Access Password
1 Choose Security Settings from the Device Settings menu.
2 Choose Access Password from the Security Settings sub-menu.
3 Do not type any characters. Press Enter to clear the password.
The password is displayed as (not set) in the Security Settings sub-menu.
5.6 SNMP Server
The SNMP Server enables or disables the SNMP function in the iPocket232. The default
setting is “enabled”.
To enable or disable the SNMP Server:
1 Choose Security Settings from the Device Settings menu.
2 Choose SNMP Server from the Security Settings sub-menu.
You are prompted to enable or disable the SNMP Server, as shown below.
The SNMP server allows access to many internal statistics as well as the values seen in the
system status page.
A. enabled B. disabled
Choose desired setting or press ESC to cancel:
SNMP Server Options
3 Type the letter that corresponds to the desired setting and press Enter.
5.7 SNMP Settings
IPocket232 products support SNMPv2c. SNMP (Simple Network Management Protocol)
is a protocol for viewing network statistics and settings. An SNMP management system
consists of a manager (remote) and an agent (IPocket232 device) using UDP as the
communication protocol.
To Next Page
Loading...