iPocket232 User Guide 3 Configuring the Ethernet Settings
23-CML000293 iPocket232 Inc. 19
Gateway
The Gateway specified under Additional Gateway defines the address of the second
router (gateway). Packets with destination addresses matching the Network Address and
Subnet Mask configured above are sent to the additional gateway.
N
OTE
: The Additional Gateway must be on the same subnet as the device.
To enter or change the Gateway:
1 Choose Ethernet from the Device Settings menu.
2 Choose Gateway under Additional Gateway from the Ethernet Settings sub-menu. You
are prompted to enter the IP address of the gateway.
3 Type the gateway address at the prompt (in the format xxx.xxx.xxx.xxx) and press Enter.
To Next Page
Loading...