7 Accessing System Information iPocket232 User Guide
23-CML000293 iPocket232 Inc. 62
TELNET: login from xxx.xxx.xxx.xxx accepted
The unit went into telnet configuration mode, a password
prompt was given, and the correct password (configured
Remote Password) was entered.
TELNET: login from
xxx.xxx.xxx.xxx rejected (timeout)
The unit went into telnet configuration mode, a password
prompt was given, and the correct password was entered,
but no response was input within the 30 second timeout
period. Unit does not reset.
TELNET: login from
xxx.xxx.xxx.xxx rejected (invalid password)
The unit went into telnet configuration mode, a password
prompt was given, but the password entered did not
match the configured Remote Password. Unit does not
reset.
Port #n: Listening for connection on tcp port
pppp...
The unit will allow incoming TCP connections on port
pppp.
Port #n: Connection attempt to
xxx.xxx.xxx.xxx:pppp...
The unit is contacting the remote server at the IP address
and port indicated.
Port #n: Incoming connection on tcp port pppp
from xxx.xxx.xxx.xxx:pppp
The unit has detected an incoming communication from
the remote host indicated on port pppp.
Port #n: Connection was established with
xxx.xxx.xxx.xxx:pppp
The unit has established a TCP connection with the
remote host indicated on port pppp.
Port #n: No response connecting to host at
xxx.xxx.xxx.xxx:pppp
The remote host has not responded to any TCP session
establishment requests.
Port #n: No response from host at
xxx.xxx.xxx.xxx:pppp
The remote host is no longer responding to TCP traffic
(after it had previously been responding).
Port #n: Connection was refused by
xxx.xxx.xxx.xxx:pppp...
The remote host actively refused a connection request
from the unit.
Connection was not from configured remote
address - refused
The incoming connection attempt was not from the IP
address configured as the Remote IP.
To Next Page
Loading...