iPocket232 User Guide Appendix F: MCC
23-CML000293 iPocket232 Inc. F-2
N
OTE
: If any characters arrive from the DTE while the modem is executing a
command, such as ATA or ATD, that command is aborted.
Supported AT Commands
The iPocket232 supports a subset of the standard Hayes command set, and a
selection of extended commands, including the ability to initiate and perform FTP
and HTTP transfers (see page F-10).
N
OTE
: You can test the iPocket232 modem, when not in configuration mode, by
typing AT commands in your terminal software (HyperTerminal, Procomm Plus).
N
OTE
: Only the options listed under Parameters are valid. Any unsupported
standard command options return an OK result. Any unsupported non-standard
commands return an error result. Options not required are ignored.
The following two tables describe the supported standard AT commands and the
extended AT& and AT+ commands:
To Next Page
Loading...