5. Verify the handlebar forward/back travel is smooth and that the handlebar slider is
stopped from sliding off the post slider by the travel limit screw. For Spinner® Chro-
no™ Power models, verify the data COMM cable has enough slack for handlebar min-
imum to maximum travel adjustment.
6. Verify the handlebar adjustment knob operation and that it holds the handlebar in pos-
ition.
See Also
"Handlebar Adjustment Knob Replacement" on the next page
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 103
5 Replacement Procedures
Handlebar Assembly Replacement
To Next Page
Loading...
