Precor SPINNER CHRONO POWER User Manual

3. Remove the rear stabilizer by removing the two 6 mm hex key mounting bolts (2x)
and washers (2x). Retain part(s) and/or fastener(s) for installation.
NOTE:The stabilizer attachment bar can slide out of the weldment mounting
bracket. Make sure the attachment bar remains in position and not lost between
removal and installation.
Installation Instructions
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 141
5 Replacement Procedures
Stabilizer Replacement

Precor SPINNER CHRONO POWER Specifications

General

Brand	Precor
Model	SPINNER CHRONO POWER
Category	Exercise Bike
Language	English