Chapter 5: Installing and Configuring DADman Software
23
Fixed IP Address
You must have a preferred range of IP addresses, and a network mask for the computer network and the connected MTRX units.
To use a fixed IP address:
1 Configure your computer IP address and network mask using the Mac System Preferences or the Windows Control Panel to 10.0.7.25
| 255.255.255.0 for example.
2 Choose Settings > Device List, then right-click the MTRX II and choose Network Settings.
3 Configure each MTRX unit in turn with a unique IP address and the preferred network mask on the same subnet as the computer, for
example 10.0.7.21 | 255.255.255.0. In this window you can also configure the IP audio network settings.
4 When you are done you can connect more than one MTRX II (or MTRX) to the network, and each one appears in the DADman
Device List.
Updating Pro Tools | MTRX II Firmware
To update your Pro Tools | MTRX II firmware:
1 Visit avid.com and log in to your Avid Master Account.
2 Download the latest MTRX II firmware from the My Products page of your Avid Master Account.
3 Launch DADman and choose Settings > Device List (make sure your MTRX II unit is connected and ready).
4 Right-click on the MTRX II unit in the Device List that you want to upgrade.
5 Choose Firmware Update.
6 In the resulting dialog, click File.
7 Navigate to and select the MTRX II firmware file that you downloaded from your Avid Master Account.
8 When prompted, confirm that you want to update the firmware for the MTRX II unit.
9 A progress dialog appears. The update process takes a few minutes.
10 Once the firmware update is complete, you are prompted to restart the unit.
Save and back up your MTRX II Configuration files (.dms) and Monitor Profile files (.dmprof) before updating MTRX II firmware.
For more information, see ... .
To Next Page
Loading...