Chapter 9: Controlling MTRX II Preamps from Pro Tools (Mac Only) 58
Chapter 9: Controlling MTRX II Preamps from Pro Tools
(Mac Only)
On Mac, you can control the microphone preamps for installed Pro Tools | MTRX 8-channel Mic/Line AD cards and using the PRE
controls in Pro Tools (as well as from Pro Tools–compatible MIDI and EUCON control surfaces).
Configuring Audio MIDI Setup
Use the IAC Driver in the macOS Audio MIDI Setup utility to route MIDI between Pro Tools and MTRX II.
To configure Audio MIDI Setup (AMS) for Pro Tools PRE control of MTRX II:
1 Do one of the following:
• In Pro Tools, choose
Setup > MIDI > MIDI Setup.
• Launch Audio MIDI Setup (AMS) from the Finder (/Applications/Utilities/Audio Midi Setup).
2 In AMS, choose Window > Show MIDI Studio.
3 Ensure that two virtual MIDI busses are available in the Audio MIDI Setup IAC Driver and that Device is online is enabled.
4 Quit Audio MIDI Setup.
Audio MIDI Setup with two IAC busses
To Next Page
Loading...