Chapter 6: DADman Software
30
Dante
Sample Rate (Main or Card)
Follow
Dante is set to the sample rate of MTRX II.
Free
Dante sample rate is not set by MTRX II. The sample rate must be set by the Dante Controller.
Latency (Main or Card)
Value
Sets the Dante network latency from 250 to 21,333 microseconds (21,333 milliseconds).
Preferred Master (Main or Card)
Yes
Dante is set to the preferred master of the Dante clock. The Dante network is synchronized to MTRX II Dante.
No
Dante clocks to the Dante network.
SRC Enable (Card Only)
On
Enables the sample rate converter.
Off
Disables the sample rate converter.
Any installed Dante expansion card supports Dante Domain Manager (DDM). When the card is entered into a domain, the control of
the Dante card is disabled from DADman software. However, the actual status of the setting are still visible.
Dante configuration options (Main shown)
Dante configuration options (Card shown)
To Next Page
Loading...