PROLEC PME200 User Manual

562200-000, Issue 1.2, December 2015
13 of 62
5.3 User Login
PME may be configured to work with the built-in user list. If so, the system will prompt for
a user login pass code after acknowledging the safety warning screen. Select the user
name required and the login code screen will appear.
Using the Arrow icon buttons, enter a valid pass code. The previous pass code digit will
be replaced with a star as the code is entered. Press the Tick icon button to confirm the
login pass code. If a valid pass code is entered the system will commence normal opera-
tion.
Logging out is described in section 5.5
If an incorrect login code is entered, a failure screen will be displayed. Press the Tick icon
button to return to the Select User screen.
Moves highlighter UP
Select highlighted
name to open the En-
ter Login Code screen
below
Decreases highlighted
digit
Moves highlighter to
right
Increases highlighted
digit
Moves highlighter
DOWN
Moves highlighter to
left or Hold to delete
digit
Cancel without change
Exit Login
Accept displayed value

PROLEC PME200 Specifications

General

Brand	PROLEC
Model	PME200
Category	Measuring Instruments
Language	English