This guide describes operation of the
PROLEC PME LIFTING AND MACHINE ENVELOPE SAFETY SYSTEM FOR CON-
STRUCTION PLANT
Model covered : PART No. MODEL Ref
0050X0-X00 PME200 - RCI + MEI SYSTEM
0050X0-X00 PME200 - RCC + MEC SYSTEM
Prolec supports a nationwide network of fully trained service engineers. Warranty claims,
service work, technical information and spare parts are available by contacting :
Prolec Ltd Telephone +44 (0) 1202 681190
25 Benson Road Fax +44 (0) 1202 677909
Nuffield Industrial Estate E-mail service@prolec.co.uk
Poole Dorset BH17 0GB
DURING NORMAL OPERATION THE SAFE WORKING LOAD OF A CRANE SHOULD
NOT BE EXCEEDED. THEREFORE THE WARNING OF OVERLOAD SHOULD NOT
BE USED AS A NORMAL OPERATING FACILITY. IT SHOULD BE NOTED THAT
CERTAIN STATUTORY REQUIREMENTS DO NOT PERMIT THE SAFE WORKING
LOAD TO BE EXCEEDED EXCEPT FOR THE PURPOSE OF TESTING.
THIS RATED CAPACITY INDICATOR / CONTROLLER (RCI, RCC) IS NOT SUITABLE
FOR USE IN EXPLOSIVE ATMOSPHERES. ADJUSTMENT BY UNAUTHORISED
PERSONS WILL INVALIDATE ANY WARRANTY OR CERTIFICATION SUPPLIED. IF
A PROBLEM ARISES WHICH CANNOT BE RECTIFIED USING THIS GUIDE,
AUTHORISED SERVICE SHOULD BE SOUGHT.
THIS DEVICE IS CERTIFIED TO MEET CURRENT UK & EC SAFETY REGULATIONS
FOR LIFTING OPERATIONS.
Any alterations or modifications to machine components which affect this system and any
system component failure must be reported to Prolec Ltd or via the machine convertor/
service agreement holder. This manual must be kept with the product and be passed on
to any subsequent user of the product.
Whilst every effort has been made to ensure the accuracy of the information supplied in
this manual, Prolec Ltd cannot be held responsible for any errors or omissions.
This system records data on the machine’s operation.
Manufacturers original instructions.
To Next Page
Loading...
Need help?
General