ProMinent
®
Page 37
DMT settings
7.2.4.3 Change access code
The factory-set default access code is 5000. This setting allows unlimited
access to the calibration menu and the settings level menu options.
This code can be changed in the third menu option; “change access code”.
Use the change key
to bring up the individual digits and confirm using the
enter key. Once all digits have been selected you can activate the code by
pressing the enter key once more.
NOTE
• If an access code has been activated, both the calibration
menu and the menu options are access-protected.
To gain access, enter the access code when requested to
do so and confirm using the enter key
. Access
protection is reactivated when the DMT returns to
continuous display mode.
• Deactivate the access code by resetting the code to 5000 in
the “change access code” menu option.
BA_DM_163_03_08_GB.p65 26.03.2008, 10:20 Uhr37
To Next Page
Loading...
Need help?
General
