6.
To complete the setting: press
[Menu]
.
Alternatively: wait 15 seconds or exit the
‘Menu’
via
[Menu]
or
via
‘End’
.
Briefly press the
[Clickwheel]
.
ð
The software switches to the next menu point or back to the
menu and saves the entry.
Press
[Back]
.
ð
The software switches to the next menu point or back to the
menu without saving anything.
Press
[Menu]
.
ð
The software cancels the entry and switches to a continuous
display without saving anything.
B0777
5432
5
432
4
32
5
5432
2
543
a)
b)
c)
Fig. 30: a) Changing from one figure to its initial figures; b) Changing the figure; c) Returning from the last figure to the
(complete) figure (to correct a wrong figure, for example0.
Changing a (complete) number
Turn the
[Clickwheel]
.
ð
The value of the figure highlighted is increased or lowered.
Changing figures
1.
To adjust the value of a figure, press
[Priming]
.
ð
The first figure is highlighted - see Figure above, point a)
2. To adjust the value of a figure, turn the
[Clickwheel]
.
3.
To move to the next figure, press
[Priming]
- see Fig. above, point
b).
Confirming an entry
Quitting a menu option without confirming
it
Returning to a continuous display
Changing adjustable variables
Basic Set-up Principles
43
To Next Page
Loading...
