Page 66 of 126
Proton Products SL mini and SLR mini Series Speed and Length Gauges Instruction Manual - issue 1s
REQUEST CONTINUOUSLY REPEATING VALUES FOR ONE OR A RANGE OF
‘OUTPUT’ PARAMETERS
The repartition rate is the maximum possible and only limited by the data length and baud rate. The
parameters must be consecutive when requesting multiple parameters.
Request Format 1:
#
Parameter number
Carriage return
Line feed
Request Format 2:
#
First parameter number
Space
Number of parameters
Carriage return
Line feed
Reply Format 1:
Parameter value
Carriage return
Line feed
Reply Format 2:
First output parameter value
Carriage return
Line feed
Second output parameter value
Carriage return
Line feed
Third output parameter and so on, until the end of the range.
REQUEST VALUE ONCE FOR ONE OR A RANGE OF ‘OUTPUT’ PARAMETERS
The request and reply format is identical to the # format given below except that # is replaced by ~.
To Next Page
Loading...