Configuration MP.11-R Installation and Management
Filtering Parameters
107
Add Entries to the IP Access Table
To add an entry, click Add Table Entries, specify the IP address and mask of the wireless stations to which you want to
grant access, and click Add.
CAUTION: Ensure that the IP address of the management PC you use to manage the unit is within the first entry in the
table, as this filter takes effect immediately. Otherwise, you will have locked yourself out.
If you do lock yourself out, you may try to give the PC the correct IP address for management; otherwise you
must reset the unit via the CLI over the serial port.
Edit/Delete Entries in the IP Access Table
To edit or delete table entries, click Edit/Delete Table Entries, make your changes, and click OK.
To Next Page
Loading...
Need help?
General
